|
Veradel® 3600RP
聚醚砜
Solvay Specialty Polymers
Technical Data
產品說明
Veradel® 3600RP hydroxyl-functionalized polyethersulfone (r-PESU) is an amorphous, high-temperature sulfone polymer featuring reactive end groups to enhance solubility for dissolving or dispersing into solutions and to improve adhesion to substrates when used as a coating.
Veradel 3600RP r-PESU offers excellent toughness and outstanding hydrolytic resistance. It resists attack from steam, boiling water and mineral acids. Cast films or coatings of r-PESU are transparent and have additional desirable properties, including long term thermal stability, excellent metal adhesion and formability and inherent flame resistance.
Veradel r-PESU polymers are available in two molecular weight regimes. Veradel® 3000RP is a high molecular weight sulfone polymer with a relatively low level of functionality while Veradel 3600RP has a lower molecular weight sulfone polymer (approximately half the molecular weight of the Veradel 3000RP) with roughly 3-5 times higher level of functionality. The differences in molecular weight results in highly varied levels of viscosity, when measured under similar conditions.
Typical applications include high-temperature coating formulations and specialty adhesives.
All Veradel r-PESU polymers are produced at Solvay's state-of-the-art, world-scale facility in Panoli, India under ISO 9001:2000 and ISO 14001:2004 certified quality management systems.
總體
材料狀態 • 已商用：當前有效
資料 1 • Technical Datasheet
Search for UL Yellow Card • Solvay Specialty Polymers
• Veradel®
供貨地區 • 北美洲 • 南美洲 • 亞太地區
• 非洲和中東 • 歐洲
• 尺寸穩定性良好 • 流動性高 • 熱穩定性，良好
• 低分子量 • 耐化學性良好
• 韌性良好
性能特點 • 高拉伸強度 • 耐熱性，高
• 中等硬度
• 良好的抗蠕變性 • 耐水解性
• 阻燃性能
• 良好粘結性 • 耐酸
用途 • 涂敷應用 • 粘合劑 • 粘合劑
機構評級 • NSF 51 2
RoHS 合規性 • 聯系制造商
外觀 • Transparent - Slight Yellow
形式 • 粉狀 • 顆粒
加工方法 • 可噴涂 • 溶液處理 • 涂層
物理性能 額定值單位制 測試方法
溶液粘度 Internal Method
-- 4 80mPa•s
-- 5 560mPa•s
OH End Groups - Titration 170meq/g Internal Method
Residual Solvent - Gas Chromatography 1.5% Internal Method
含水量 - Measured at time of packing 1.5% Internal Method
顆粒大小 - D50 Sieve measurement 250µm Internal Method
機械性能 額定值單位制 測試方法
拉伸模量 2700MPa ASTM D638
抗張強度 90.0MPa ASTM D638
伸長率 (屈服) 6.5% ASTM D638
彎曲模量 2600MPa ASTM D790
彎曲強度 2.60MPa ASTM D790
沖擊性能 額定值單位制 測試方法
懸壁梁缺口沖擊強度 53J/m ASTM D256
熱性能 額定值單位制 測試方法
玻璃轉化溫度 220°C DSC
1 / 3
Veradel® 3600RP
聚醚砜
Solvay Specialty Polymers
備注
1 通過這些鏈接您能夠訪問供應商資料。我們盡量保證及時更新資料；不過您可以從供應商處了解最新資料。
2 Maximum Temperature of Use: 124°C (356°F)
3 一般屬性：這些不能被視為規格。
4 25% solution in DMAc at 40°C (measured at 35% solids)
5 35% solution in DMAc at 40°C (measured at 35% solids)
|
